View Full Version : Bad vibration at 74857-55 mph
streakerok
12-31-2013, 09:58 AM
Like the title sead.at 45mph up to 55mph I get a very bad shake in the front end. It stops when I hit 55. Any suggestions what it might be. The ball joints , tie rod ends , shocks, and stabilizer, are all new.the truck is lifted with 33s.here is a pick of the truck
Sent from my SPH-L710 using Tapatalk 4
----------
http://img.tapatalk.com/d/13/12/31/ama9aguh.jpg
Sent from my SPH-L710 using Tapatalk 4
----------
http://img.tapatalk.com/d/13/12/31/ygy4ydym.jpg
Sent from my SPH-L710 using Tapatalk 4
Jersey_Joe
12-31-2013, 11:34 AM
Hey bro. I'm gona say u need a wheel balancing. Go to a good shop. Some places just can't get the hang of doin the bigger tires. I can pretty much gdamn guarantee it's your balancing is off
streakerok
12-31-2013, 01:32 PM
Did a full r an b no change.sorry left that part out
Sent from my SPH-L710 using Tapatalk 4
lee reece
12-31-2013, 03:10 PM
If your sure that they did a goog balance then you should look at the other front end parts you didn't change yet!
2007 F150 XLT FX2 SPORT - 5.4l 3V 3.73 LIMITED SLIP EDGE/EVOLUTION PROGRAMMER
Raptor05121
12-31-2013, 03:39 PM
Could be tie rod ends, balljoint, and/or brake calipers/rotors.
RhinoZ24
12-31-2013, 07:14 PM
Hub bearings too
jake831431
12-31-2013, 07:47 PM
Get the front end alignment that fixed it on my 07 F -150
Sent from my SM-N900V using Tapatalk
----------
I had the same problem took it to 5 different tire shops and had tires balanced never fixed it
Sent from my SM-N900V using Tapatalk
Jersey_Joe
01-01-2014, 08:02 AM
Did a full r an b no change.sorry left that part out Sent from my SPH-L710 using Tapatalk 4
Lol. Haha. Ha that's important. Lol. Can't leave that one out. Check to see if u have your wheel weights. I know u had it done but. Bigger tiires? Most places fail lol. But start checking your front end out
streakerok
01-01-2014, 01:47 PM
Im afraid its a hub bearing. It feels like its coming from the driver side front.
Sent from my SPH-L710 using Tapatalk 4
Raptor05121
01-01-2014, 02:02 PM
2WD or 4WD?
RhinoZ24
01-01-2014, 03:10 PM
Im afraid its a hub bearing. It feels like its coming from the driver side front.
Sent from my SPH-L710 using Tapatalk 4
Happened to my '05, both front hub bearings. Slight vibration around 30-45mph and a noise from the front that sounded like I had put on 35" mud tires or something.
streakerok
01-01-2014, 08:25 PM
Its a 4x4
Sent from my SPH-L710 using Tapatalk 4
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.